Product Code: E-CMD

Carbon Monoxide Detector, CO

• Continuous air monitoring.
• Pre-set alarm points alert at:
  • 70 ppm after 60 to 240 minutes
  • 150 ppm after 10 to 50 minutes
  • 400 ppm after 4 to 15 minutes
• Flush or surface mount.
• Test functionality of electrochemical CO sensing cell.
• Connect to RJ45 or digital input sensor ports.
• Screw terminal
  • To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
  • Maximum cable length: 1000 ft (305m)
• LED indicators for operation status and system test.
• Current consumption: 40mA @ 12VDC.
• Powered by E-2D/5D/16D.
• Regulatory approvals: UL

Product Code: E-GD-MBP

Gas Detector — Methane, Butane, Propane

• Use to detect leaks of combustible gas (methane, propane, butane, acetylene, etc.)
• Choose between two levels of detection:
  • First level:
    • Detects methane at concentrations in excess of 0.5%.
    • Detects propane/iso-butane at concentrations in excess of 0.3%.
  • Second level:
    • Detects methane at concentrations in excess of 0.8%.
    • Detects propane/iso-butane at concentrations in excess of 0.5%.
• Continuous air monitoring.
• Audible alarm signal: 94 dB at 1 foot.
• Relay specifications: level selectable, normally open or normally closed, 250V AC, max 5A.
• Maximum cable length: 1000 ft (305m)
• Powered by E-2D/5D/16D.
• Current consumption: 150mA @ 12VDC.
• Regulatory approvals: CE

Product Code: E-H2

Hydrogen Gas Detector

• Use to detect leaks of hydrogen gas in battery monitoring/charging rooms, substations, uninterruptible power supplies (UPS), and hydrogen fueled back-up power systems.
• Alarm set point: 10% LEL hydrogen gas.
• SPDT Alarm and normally-closed output relay.
• Self-restoring or latching options.
• Sensor requires no maintenance or recalibration.
• Includes mounting hardware.
• Voltage supply: 12 to 24 VDC or VAC.
  • Can be powered by the E-2D/5D/16D at 12VDC.
  • Current consumption: 70mA @ 12VDC.
• Operating temperature: 32 to 120°F (0 to 49°C).
• Dimensions WxDxH (in): 4.5x5x1.63 (114x127x41 mm).
• Powered by E-2D/5D/16D.

Product Code: E-H2S

Hydrogen Sulfide Detector

• Use to monitor the presence of Hydrogen Sulfide from failed UPS (uninterrupted power supply) lead acid batteries, in paper mills, refineries, waste disposable facilities, etc.
• Measures H2S in a range of 0 to 50 ppm.
• 5A SPDT fan relay controls exhaust fans, valves, or louvers.
• Alerts are based solely on the measured H2S levels reported by the E-H2S.
• Mounts on a 4×4″ electric box.
• Dimensions WxDxH (in): 4.5x4x2.13 (114x102x54 mm).
• Operating temperature: 0 to 125°F (-18 to 52°C).
• Operating and storage relative humidity: 10 to 90% non-condensing RH.
• Power consumption: 3W.
• Requires the E-S420MA-24V to operate.
  • Maximum cable length: 500 ft (152 m).
  • Powered by E-2D/5D/16D.
• Compatible with the E-2D/5D/16D.
• Regulatory approvals: ETL, UL.