Environment Monitoring System

Environmental monitoring systems prevent hardware damage to server rooms, data centers and network closets with critical condition alerts and remote reboot capability.

Environmental Sensors for E-2D/5D/16D>Wind Speed Sensor

h

Data Sheet

h

Installation Manual

h

CAD Drawing

Product Code: E-IPCAM-WHNPT-V4

 

High-Definition Wireless/Wired Day/Night Pan/Tilt IP Camera

 

  • View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
  • With the E-2D/5D/16D, a triggered snapshot can be forwarded in alert e-mails or stored locally on a connected flash drive.
    • A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)
    • ONVIF authentication must be disabled on the camera.
  • Two-way audio with built-in microphone and speaker.
  • IR night vision supported up to 32.8 feet (10 m).
  • 1/2.7″ Progressive Scan CMOS sensor.
  • Video codecs/Resolution:
    • H.264/H.264B/H.265: 1920×1080 up to 30fps
    • MJPEG: 1920×1080 up to 30fps
  • Lens: 4 mm (0.16 in).
  • Supports wireless 802.11b/g/n.
  • Viewing Angle: 90°
  • Pan and tilt:
    • Pan: 360°
    • Tilt: 90°
  • Built-in motion detection.
    • Camera sends snapshots via email when motion is detected.
  • Power:
    • Input: 100 to 240 VAC at 50 or 60 Hz
    • Output: 5VDC, 1.5A external power adapter
  • 10/100 Mbps Ethernet port for wired connections.
  • Environmental
    • Operating temperature: 14 to 113°F (-10 to 45°C).
    • Operating humidity: Up to 95% non-condensing RH.
  • Dimensions WxDxH: 4.66×3.94×4.13 in (118x100x105 mm).
  • Compatible with the E-2D/5D/16D.
  • Mounting hardware included.
  • Regulatory approvals:
    • CE, FCC, RoHS.
    • TAA Compliant

Ordering Information

Part No.

E-IPCAM-WHNPT-V4

Description

High-Definition Wireless/Wired Day/Night Pan/Tilt IP Camera
h

Data Sheet

h

Installation Manual

h

CAD Drawing

Product Code: E-IPCAM-HNPO-P

 

Ultra-HD Wired Day/Night Outdoor Bullet IP Camera with Power over Ethernet (POE)

 

  • View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
  • With the E-2D/5D/16D, a triggered snapshot can be forwarded in alert emails or stored locally on a connected flash drive.
    • A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)
    • ONVIF authentication must be disabled on the camera.
  • IR night vision supported up to 98.4 feet (30 m).
  • 1/2.7″ 5-Megapixel Progressive Scan CMOS sensor.
  • Video Compression: H.265, H.264
  • Max resolution and frame rate:
    • Main stream: 2592×1944 up to 20 fps, 2688×1520 up to 30 fps
    • Sub stream: 704×576 up to 25 fps, 704×480 up to 30 fps
  • Lens: 2.8 mm (0.11 in).
  • Viewing Angle: 103°
  • System compatibility: ONVIF
  • Built-in motion detection.
    • Auto-patrol preset positions: 4.
    • Camera sends snapshots via email when motion is detected.
  • 10/100 Mbps Ethernet port for wired connections.
  • Power:
    • Input: 100 to 240 VAC at 50 or 60 Hz
    • Output: 12 VDC, 1A external power adapter (included)
    • Max consumption: 5.6 W
    • Power over Ethernet standards supported: IEEE 802.3af 
  • Operating and storage temperature: -40 to 140°F (-40 to 60°C).
  • Dimensions WxDxH: 2.76×6.54×2.76 in (70x166x70 mm).
  • Waterproof rating: IP67
  • Compatible with the E-2D/5D/16D.
  • Mounting hardware included.
  • Regulatory approvals: CE, FCC, RoHS.

Ordering Information

Part No.

E-IPCAM-HNPO-P

Description

Ultra-HD Wired Day/Night Outdoor Bullet IP Camera with Power over Ethernet (POE)
h

Data Sheet

h

Installation Manual

h

CAD Drawing

Product Code: E-IPCAM-DHNPO-V2P

 

High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera with Power over Ethernet (PoE)

 

  • View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
    • Control the camera using the camera web interface accessible from the ENVIROMUX web interface.
  • With the E-2D/5D/16D, a triggered snapshot can be forwarded in alert e-mails or stored locally on a connected flash drive.
    • A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)
  • 1/2.8″ Progressive Scan CMOS
  • Video Compression: H.265/H.264/MJPEG
    • Supports three simultaneous video streams
  • 2MP resolution @ 30 fps
    • Supports 1920×1080, 1280×960, 1280×720
  • Night Vision IR Range: 98 feet ( 30 m)
  • Lens: 4 mm (0.16 in)
  • Viewing angle: 86.4°
  • Pan: 0 to 355°
  • Tilt: 0 to 75°
  • Rotate: 0 to 355°
  • Power:
    • Input: 100 to 240 VAC at 50 or 60 Hz
    • Output: 12 VDC, 1A external power adapter (included)
    • Max consumption: 5 W
    • Power over Ethernet standards supported: IEEE 802.3af
  • 10/100 Mbps Ethernet port for wired connections.
  • Micro SD memory card slot (up to 128 GB)
  • System compatibility: ONVIF, ISAPI, SDK, Ehome
  • Operating temperature: -22 to 140°F (-30 to 60°C).
  • Dimensions WxH: 4.37×3.24″ (111×82 mm)
  • Waterproof rating: IP67 (camera housing only)
  • Compatible with E-2D/5D/16D.
  • Regulatory approvals: CE, FCC, RoHS

Ordering Information

Part No.

E-IPCAM-DHNPO-V2P

Description

High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera with Power over Ethernet (PoE)

Featured Products: ENVIROMUX

ENVIROMUX-2D (Small Enterprise Environment Monitoring System)

ENVIROMUX-5D (Medium Enterprise Environment Monitoring System)

ENVIROMUX-16DEL (Large Enterprise Environment Monitoring System)

ENVIROMUX-MICRO (Micro Environment Monitoring System)

ENVIROMUX-MINI (Mini Environment Monitoring System)

ENVIROMUX-1W (Low Cost Environment Monitoring System)