ENVIROMUX - ENVIRONMENT MONITORING SYSTEM

Environmental monitoring systems prevent hardware damage to server rooms, data centers and network closets with critical condition alerts and remote reboot capability.

E-1W: Low Cost Environment Monitoring System

Product Code: ENVIROMUX-1W or E-1W

Warranty: 12 month Standard Warranty

Overview

The ENVIROMUX® Environment Monitoring System (EMS) with 1-Wire Sensor Interface monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, web page, network management (SNMP), and/or SMS messages (via email-to-SMS).

The IoT system supports 24 single reading 1-wire sensors in any combination – temperature, humidity, dew point, or digital inputs – and 2 separate digital inputs. It functions independently or as an IP-connected remote sensor for the E-2D/5D/16D.

The ENVIROMUX® Environment Monitoring System (EMS) with 1-Wire Sensor Interface monitors critical environmental conditions, such as temperature, humidity, liquid water presence, power, intrusion, and smoke. When a sensor goes out of range of a configurable threshold, the system will notify you via email, web page, network management (SNMP), and/or SMS messages (via email-to-SMS).

 

The IoT system supports 24 single reading 1-wire sensors in any combination – temperature, humidity, dew point, or digital inputs – and 2 separate digital inputs. It functions independently or as an IP-connected remote sensor for the E-2D/5D/16D.

 

  • Monitor and manage environmental and security conditions over IP.
  • Sensors supported:
    • 2 digital inputs sensitive to contact closure.
    • 2 RJ11 6P4C connectors for daisy-chaining 1-wire temperature/humidity/dew point or digital input expanders in any combination.
      • Up to 24 temperature sensors (or any single reading 1-wire sensors) can be connected between both RJ11 connectors.
      • Up to 8 temperature/humidity/dew point combination 1-wire sensors can be connected between both RJ11 connectors. Each temperature/humidity/dew point sensor is equivalent to 3 single reading sensors.
      • Up to 12 E-DI2-1W digital input expanders can be connected between both RJ11 connectors to allow a maximum of 24 additional digital inputs. Each E-DI2-1W is equivalent to 2 single reading sensors.
      • Maximum cable length supported on each connector is up to 600ft (183 m) depending on the configuration and number of connected sensors.
      • Use RJ11 splitters (RJ11-3JCK) to daisy-chain 1-wire sensors (sold separately).
  • Sensors are hot pluggable.
    • The sensors will automatically be detected on power up or a Detect Devices button on the summary page can be selected when logged into the unit.
  • Monitors (ping) up to 4 IP network devices – alerts are sent if devices are not responding.
  • Sensor conditions can be configured to trigger alerts by themselves, and/or be used in combination with other alerts to trigger one Smart Alert.
  • Create multiple alerts for any installed sensor.
  • Sensor conditions can be configured to trigger alerts by themselves, and/or be used in combination with other alerts to trigger one Smart Alert.
    • Configure up to 32 alerts, and one Smart Alert.
  • Supports 4 IP network video cameras for live view of any facility.
  • Dual redundant power supplies for connection to two separate power sources.
    • The second power supply is sold separately.
  • Available with optional Power over Ethernet (POE).
  • Integrates with various Open Source SNMP monitoring packages – Nagios
    • The unit can be polled via SNMP.
  • Optional intuitive graphical management software provides an easy-to-use, unified interface for both monitoring and configuring up to 3,000 ENVIROMUX units and all connected sensors.
  • Security: HTTPS, SSLv3, AES 256-bit encryption, 16-character username/password authentication, user account restricted access rights.
  • Integrated mounting brackets for easy surface/wall mounting.
    • Optional DIN mounting available.
  • Ideal for a wide range of applications including IT infrastructure monitoring, cold storage/freezer monitoring, or any unmanned area that needs to be monitored.
  • Use the E-1W(P) with a wireless router and Wi-Fi Range Extender to create a Wireless Environment Monitoring System.
    • Configure, monitor, and receive alerts without the use of a wired network connection.
    RJ11 Sensor Ports
    • Two RJ11 6P4C jacks for daisy-chaining 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination.
      • Up to 24 temperature sensors (or any single reading 1-wire sensors) can be connected between both RJ11 connectors.
      • Up to 8 temperature/humidity/dew point combination 1-wire sensors can be split between both RJ11 connectors. Each temperature/humidity/dew point sensor is equivalent to 3 single reading sensors
      • Up to 12 digital input expanders can be split between both RJ11 connectors to allow a maximum of 24 additional digital inputs. Each digital input expander is equivalent to 2 single reading sensors
      • Maximum cable length supported on each connector is up to 600ft (183 m) depending on the configuration and number of connected sensors.
        • This maximum includes the cable length of each sensor.
      • RJ11 splitters or t-tap boards (RJ11-3JCK) for daisy-chaining sensors are sold separately.
        • Sensors can be extended up to 7 feet from an RJ11-3JCK
    Dry Contact Closures
    • Two screw terminal pairs for connecting dry contact devices and liquid detection sensors.
    USB Port
    • One female Micro USB connector – reserved for future use.
    Ethernet Port
    • One female RJ45 connector.
    • 10/100 Base-T Ethernet interface.
    Protocols
    • HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, TLS v1.2, AES & DES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour
    • Compatible with any SNMP management software.
      • The unit can be polled via SNMP.
    • Operates and configures via HTTP/HTTPS web page.
      • Supports Microsoft Edge, Internet Explorer 6.0 and higher, Firefox 1.5 and higher, Google Chrome, and Safari 1.3 and higher (for MAC).
      • Multiplatform support: Windows 7/8/10, Windows Server 2008/2012/2016/2019, Solaris, Linux, FreeBSD, and MAC OS 10/11.
    • An IP address can be assigned to the E-1W automatically by a DHCP server.
    • Generates SNMP traps, email alerts, syslog messages, and SMS messages (via email-to-SMS).
      • Alerts are posted in event log, which is accessible through Web user interface.
      • Email alerts can be sent to 9 addresses.
        • Users can configure the schedule for when they will be alerted.
    • Supports HTTP REST API to poll sensor data with response in JSON format.
    Dimensions
    • WxDxH in: 4×3.65×1.37 (102x93x35 mm).
    Power
    • E-1W:
      • Dual DC power provides dual redundancy.
        • If the first power source fails, the unit will automatically, without interruption, switch over to the second power source.
        • The unit draws power from the source with the highest DC voltage (nominal 5.5V).
        • If both sources have exactly the same voltage, it will draw in part from each of them.
      • 100 to 240 VAC at 50 or 60 Hz via AC adapter.
        • Includes one country-specific AC adapter. The second AC adapter is sold separately (PWR-SPLY-ELC).
      • Input voltage: 5.5VDC ±5%
      • Power consumption: 5W max.
    • E-1WP:
      • Built-in Power over Ethernet and dual DC power provides triple redundancy.
        • Power over Ethernet standards supported: IEEE 802.3af, 802.3at.
          • Proprietary schemes such as Cisco Discovery Protocol are not supported.
            • Similar legacy switches and routers will have to use PWR-SPLY-ELC.
      • If the first power source fails, the unit will automatically, without interruption, switch over to the second power source.
      • The unit draws power from the source with the highest DC voltage (nominal 5.5V).
      • If two or more sources have exactly the same voltage, it will draw in part from each of them.
      • 100 to 240 VAC at 50 or 60 Hz via AC adapter (not included).
        • Country-specific AC adapters sold separately (PWR-SPLY-ELC).
      • Input voltage: 5.5VDC ±5%
      • Power consumption: 5W max.
    • Use the PWR-48V-5-5V4A DC-DC power converter to install the E-1W in a 48V or 24V Telecom environment.
    MTBF
    • E-1W: 703,871 hours
    Environmental
    • Operating & Storage Temperature: -4 to 167°F (-20 to 75°C).
    • Operating & Storage Relative Humidity: 5 to 90% non-condensing RH.
    Regulatory Approvals
    • CE, RoHS.
    • TAA compliant.
        Web Interface
        • Configuration can be done over the Internet/LAN via Web page.
          • When connected as an IP remote sensor for an E-2D/5D/16D unit, the E-1W is configured via the E-xD web interface.
        • Supports Microsoft Edge, Internet Explorer 6.0 and higher, Firefox 1.5 and higher, Google Chrome, and Safari 1.3 and higher (for MAC).
        • Configure sensor thresholds, alarm methods, formats of alerts, and system data log.
        • View/edit sensors’ current values, thresholds and alert statuses.
          • All sensors connected to the E-1W can be viewed on one summary page.
          • User configurable settings allow sensors to return to normal status when alert condition clears, without manually acknowledging/dismissing the alert.
          • The sensors will automatically be detected on power up or a Detect Devices button on the summary page can be selected when logged into the unit.
        • View/edit entries stored in the system logs.
        • Event log records system alerts.
          • Stores up to 200 entries.
        • Data log records samples of sensor readings per minute.
          • Stores up to 43,000 entries per sensor.
        • The data log can be downloaded as a comma-separated plain text file.
        • Configure IP information (address, subnet mask, default gateway, DNS, etc.), user administrative settings, and data logging settings.
        • Up to 9 users can access the web page at one time.
        • Permissions, schedule and alert methods are configurable for each user.
        • Configure up to 32 sensor conditions (alerts).
        • Configure 1 Smart Alert to use different alert combinations to send alert messages.
        Telnet
        • Monitor over the text-based menu system accessible via Telnet.
        • Access is controlled via username/password.
        • System stores encrypted login information.
        • Two user levels: user and administrator.
        Network Operation
        • SNMP support, allowing integration into network management platforms.
        • Updating the system firmware.
        Open Source Monitoring Integration
        Optional Management Software
        • Optional intuitive graphical management software provides an easy-to-use, unified interface for both monitoring and configuring up to 3,000 ENVIROMUX units and all connected sensors.
        • Push configuration changes to multiple connected units in a group at once.
          • E.g. new users, mail server, network settings, security settings, system settings, etc.
        • Choose between Enterprise Management Software or Low-Cost Management Software.
          Sensors & Accessories – Sold Separately
          Environmental Sensors
          Security Sensors
          Communication Accessories
          Power Sensors
          Sensor Accessories

          Data Sheet:

          User Manual:

          Compatible Sensors

          Featured Products: ENVIROMUX

          ENVIROMUX-2D (Small Enterprise Environment Monitoring System)

          ENVIROMUX-5D (Medium Enterprise Environment Monitoring System)

          ENVIROMUX-16DEL (Large Enterprise Environment Monitoring System)

          ENVIROMUX-MICRO (Micro Environment Monitoring System)

          ENVIROMUX-MINI (Mini Environment Monitoring System)

          ENVIROMUX-1W (Low Cost Environment Monitoring System)

          Related Resources

          h

          Product Perspective

          h

          White Paper

          h

          Feature Comparison