100 Ohm Platinum RTD Transmitter, -20°F to 140°F or 30°F to 240°F

• Use to connect 100 Ohm RTD temperature sensors to the E-2D/5D/16D.
• Available temperature ranges:
  • E-RTDT-140: -20 to 140°F (-28 to 60°C).
  • E-RTDT-240: 30 to 240°F (-1 to 115°C).
• Accurate to within ±0.8°F (±0.45°C).
• Configuration: 2-wire connection
• Sensor Element: 100Ω platinum
• Signal Output: 4-20 mA, loop-powered
• Requires the E-S420MA-24V and an RTD sensor probe to operate with the E-2D/5D/16D.
  • Powered by E-2D/5D/16D.
• Single gang weather resistant enclosure.
• Dimensions WxDxH: 2.81×4.50×2.13 in (71x114x54 mm)
• Regulatory approvals: CE

High-Accuracy 100 Ohm Platinum RTD Transmitter, -328°F to 1562°F

• Use to connect 100 Ohm platinum RTD temperature sensors to the E-2D/5D/16D.
• Temperature range: -328 to 1562°F (-200 to 850°C)
  • When used with the E-2D/5D/16D, the supported range is -89 to 738°F (-67 to 392°C. Call an NTI product consultant to have the range expanded on the ENVIROMUX system.
• Accurate to within ±0.2°F (±0.1°C)
  • If the connected RTD sensor does not support this high of accuracy, the system will revert to the accuracy of the sensor.
• Configuration: 2, 3, or 4-wire connection
• Sensor Element: 100Ω platinum
• Signal Output: 4-20 mA
• Requires the E-S420MA-24V and an RTD sensor probe to operate with the E-2D/5D/16D.
• Din rail mount housing.
• Dimensions WxDxH: 5.08×4.09×0.89 in (129x104x23 mm)
• Includes pre-stripped country-specific line cord with tinned strands.
• Operating temperature: 32 to 131°F (0 to 55°C).
• Storage temperature: -40 to 185°F (-40 to 85°C).

Mini Probe 100 Ohm RTD Sensor, -67°F to 240°F

• Applications from -67 to 240°F (-55 to 115°C).
• Accurate to within ±0.27°F (±0.15°C).
• Probe size: 0.19″ (4.8 mm) round x 0.50″ (13 mm) long stainless steel housing.
• Cable length: 18″ (457 mm) 2-wire lead.
• 100 Ohm Pt 385 curve
• Regulatory approvals: CE
• Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
  • E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
  • E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
  • E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).

All-Purpose 100 Ohm RTD Sensor, -67°F to 221°F

• Rugged, point-sensitive waterproof sensor with 304 stainless steel probe and brass fitting.
• Applications from -67 to 221°F (-55 to 105°C).
• Accurate to within ±0.27°F (±0.15°C).
• Probe size: 9″ (229 mm)
  • Brass fitting with 1/2″ NPT male thread.
• Cable length: 18″ (457 mm) 2-wire lead.
• 100 Ohm Pt 385 curve.
• Suitable for plenum mounting, duct mounting, immersion wells, or outside air.
• Regulatory approvals: CE
• Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
  • E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
  • E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
  • E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).

All-Purpose 100 Ohm RTD Sensor, -328°F to +1112°F

• Precision sensor with 316 stainless steel probe.
• Applications from -328 to 1112°F (-200 to 600°C).
• Accurate to within ±0.27°F (±0.15°C) for -148 to 842°F (-100 to 450°C).
• Probe size: 6 in (152 mm)
• Cable length: 40 in (1.02 m) 4-wire lead.
  • Lead wire max temperature: 482°F (250°C)
• 100 Ohm Pt 385 curve.
• Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
  • E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
  • E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
  • E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).

Duct 100 Ohm RTD Sensor, -67°F to 240°F

• Rugged, waterproof sensor with 304 stainless steel probe.
• Applications from -67 to 240°F (-55 to 115°C).
• Accurate to within ±0.27°F (±0.15°C).
• Probe size: 9″ (229 mm) probe with 4″ (102 mm) electrical strap and a nylon fitting.
  • Nylon fitting with 1/2″ NPT female thread
• Cable length: 18″ (457 mm) 2-wire lead.
• 100 Ohm Pt 385 curve.
• Designed for direct mounting on sheet metal duct systems.
• Regulatory approvals: CE
• Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
  • E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
  • E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
  • E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).

Rugged Encapsulated 100 Ohm RTD Sensor, -30°F to 230°F

• Applications from -30°F to 230°F (-34°C to 110°C).
• Accurate to within ±0.6°F (±0.33°C).
• Probe size: 0.18″ (4.57 mm) round, 0.50″ (12.7 mm) long housing.
• Cable length: 8 feet (2.4 m) 24 AWG 2-wire leads
• 100 Ohm Pt 385 curve.
• Immune to the effects of moisture and condensation.
• Suitable for remote temperature sensing for building automation systems and mechanical equipment room instrumentation
• Small enough to be installed in most HVAC thermostat enclosures.
• Regulatory approvals: CE
• Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
  • E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
  • E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
  • E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).

Pipe 100 Ohm RTD Sensor with Adjustable Ring, -58°F to +540°F

• Monitor temperature on pipe surfaces.
• Applications from -58 to 540°F (-50 to 280°C).
• Accuracy:
  • At 32°F (0°C), ±0.54°F (±0.3°C)
  • At 212°F (100°C), ±1.44°F (±0.8°C)
• 100 Ohm Pt 385 curve.
• 6 ft (1.83 m) 3-wire lead.
• Adjustable ring to fit diameter of pipe.
  • E-RTDS-PAR540-2IN: Fits 1.25″ to 2″ pipe diameter.
  • E-RTDS-PAR540-6IN: Fits 2″ to 6″ pipe diameter.
  • E-RTDS-PAR540-12IN: Fits 6″ to 12″ pipe diameter.
• Regulatory approvals: RoHS.
• Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
  • E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
  • E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
  • E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).

4-20mA Sensor Converter

• External RJ45 device monitors up to two 4-20 mA analog sensors
• Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors
• Provides 24VDC, 25mA for each sensor
• Connector: Screw Terminal, 8-position.
• Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
• Includes Mounting Hardware
• Dimensions (WxDxH): 4.15×2.3×1.2″ (105x58x30 mm)
• Powered by E-2D/5D/16D.
• Compatible with E-2D/5D/16D.
• Regulatory approvals: RoHS.
• Compatible with E-FSC Fiber Converter/Extender.
  • Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
• Requires the E-RTDT-140/240/1562 and E-S420MA-24V to operate with the E-2D/5D/16D.
  • E-RTDT-140 supports temperatures -20 to 140°F (-28 to 60°C).
  • E-RTDT-240 supports temperatures 30 to 240°F (-1 to 115°C).
  • E-RTDT-1562 supports temperatures -328 to 1562°F (-200 to 855°C).