Addressable Leak Detection Sensor

• Monitors up to 4,000 feet of E-LDDC-x Liquid Location Detection Sensor Cable.
  • Detects the specific location of liquid presence.
    • If multiple leaks are occurring at the same time, you will receive notification of the location for the leak closest to E-ALDS. Once that leak is cleared, you will receive notification of the next leak closest to the E-ALDS. This will continue until all leaks are cleared.
  • Detects if there is a break in the cable.
• Supports up to 1,000 feet of E-4WNSC-x non-sensing cable.
• Leak location accuracy:
  • 20 to 1,500 feet: ±(1ft + 0.5% of sensing cable length).
  • 1,500 to 4,000 feet: ±1% of sensing cable length.
• Built-in Piezo buzzer emits loud beeps to alert personnel.
  • Output level: 70dB at 1 foot
• Max current consumption: 13mA @ 5VDC, 18mA@12VDC
• Powered by E-2D/5D/16D.
• Compatible with E-2D/5D/16D.
  • Interfaces with the E-2D/5D/16D via the RJ45 sensor port
  • Extend up to 500 feet from the E-2D/5D/16D
• M12 4-pin connector for connecting E-LDDC-x Liquid Location Detection Sensor Cable or E-4WNSC-x Non-Sensing Cable
• Dimensions WxDxH: 3.21×2.5×1.22 in (82x64x31 mm)
• Operating temperature: 32 to 158°F (0 to 70°C).
• Regulatory approvals: CE, RoHS
• Integrated mounting brackets for easy surface/wall mounting.
• Use the included terminator at the end of the E-LDDC-x Liquid Location Detection Sensor Cable
  • If the terminator is not used, the system will register a cable break.

Liquid Location Detection Sensor Cable

• For detecting water presence at a specific location.
• 100% waterproof electronics.
• Detects any conductive liquid.
• Minimum puddle: 0.6″ (15 mm) diameter.
• Detects liquid depth >0.1″ (2.5 mm).
• M12 4-pin connectors.
• Available lengths: 10/25/50/100 feet and custom lengths up to 4,000 feet.
  • Contact an NTI product consultant for custom cable lengths
• Bend radius: 0.375″ (9.53 mm)
• Operating temperature: 32 to 167°F (0 to 75°C).
• Regulatory approvals: CE, RoHS
• MTBF: 10,869,188 hrs
• Compatible with E-ALDS Addressable Leak Detection Sensor.
• Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifting after installation

4-Wire Non-Sensing Cable

• For use in areas where E-LLDS-xx sensing cable is not required.
• Available lengths: 10/25/50/100 feet and custom lengths up to 1,000 feet.
  • Contact an NTI product consultant for custom cable lengths
• M12 4-pin connectors.
• 22 AWG stranded bare copper conductors.
• Color-coded plenum-grade PVC insulation.
• Plenum-grade PVC jacket.
• Cable diameter: 0.136 in
• Operating temperature: 14 to 140°F (-10 to 60°C)
• Will ship in either white or gray.
• Regulatory approvals: CE, RoHS
• Compatible with E-ALDS Addressable Leak Detection Sensor and E-LLDC-xx Liquid Location Detection Sensor Cables.