Product Code: E-STS-O

IP65 Outdoor Temperature Sensor

• Applications from -40 to 185°F (-40 to 85°C).
• Accurate to within ±0.9°F (±0.5°C).
• Weatherproof enclosure.
  • IP65-rated water and dust protection.
• High resistance to external influences on the cable due to digital output signal.
• Re-calibration is not necessary after initial set-up.
• Quick release waterproof RJ45 connector.
• Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
• Dimensions WxDxH (in): 4.53×2.56×2.13 (115x65x54 mm).
• Powered by E-2D/5D/16D.
• Current consumption: 14mA @ 5VDC.
• MTBF: 1,942,123 hrs.
• Compatible with E-2D/5D/16D.
• Regulatory approvals: CE, RoHS
• Compatible with E-FSC Fiber Converter/Extender.
  • Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.

Product Code: E-WSS

Wind Speed Sensor/Anemometer

• Rugged anemometer
• 3-cup rotor pressed on a stainless steel shaft
• Reed switch and magnet providing one pulse per rotation
• Rotor diameter: 5 inches
• Speed range: ~ 3 mph to 125+ mph (~5 kph to over 200 kph)
• Rugged Delrin body with bronze and Rulon bushings
• Flat aluminum mounting bracket with 2 holes. Designed to be mounted on top of a pole or bracket.
• 100 feet of exterior grade wire
  • Maximum cable length: 1000 ft (305m)
• Intended for outdoor use where icing is not expected.

Barometric Pressure Transmitter

• Use for determining atmospheric air pressure.
• Pressure range: 20.8 to 32 in Hg (10.2 to 15.7 psi)
• Accuracy: ± 0.14 Hg (±0.07 psi)
• Repeatability: ± 0.03 Hg (± 0.014 psi)
• Pressure Hysteresis: ± 0.02 Hg (± 0.01 psi)
• Long-Term Stability: ± .014 Hg/year (±0.007 psi/year)
• Media compatibility: Clean, dry air and non-corrosive gases
• Output: 4-20mA
• Power requirements: 8-24VDC @ 20 mA
• Max Loop Resistance: Ohms = (V Supply – 8V)/0.02A
• Enclosure Material: Acrylonitrile butadiene styrene
• Dimensions WxDxH: 2.12×3.12×1.78 in (54x79x45 mm)
• Operating temperature: 32 to 140°F (0 to 60°C)
• Requires the E-S420MA-24V to operate with E-2D/5D/16D.
  • Maximum cable length: 500 ft (152m)
  • Powered by E-2D/5D/16D.
• Regulatory approvals: CE
• Compatible with E-FSC Fiber Converter/Extender.
  • Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.